机 型 Model | GZ150.8 |
重 量(T) Total weight (T) | 14.5 |
铲斗容量(m3) Bucket capacity(m3) | 0.6-0.7 |
发动机型号 Engine model | CUMINNS 4BTAA3.9 |
功率(kw/r/min) Power(kw/r/min) | 86/2200 |
燃油箱容积(L) Volume of fuel tank (L) | 247 |
行走速度(km/h) Traveling speed (km/h). | 5.3/3.1 |
回转速度(r/min) Slew speed (r/min) | 12 |
爬坡能力(%) Gradeability(%) | 70 |
铲斗挖掘力(KN) ISO Bucket excavating force (KN) ISO | 90 |
接地比压(KPa) Ground pressure(KPa) | 39 |
液压泵型号 Hydraulic pump model | Inline HP3V75 |
最大流量（L/min) Maximum flow(L/min) | 165*2 |
工作压力(MPa) Operating pressure (MPa) | 37 |
液压油箱容积(L) Hydraulic oil tank volume (L) | 130 |
总长(mm) Overall length (mm) | 7880 |
总宽(mm) Overall width (mm) | 2490 |
总高(动臂顶)(mm) Total height(Swing arm top)(mm) | 2780 |
总高(驾驶顶)(mm) Total height(Cab roof)(mm) | 2815 |
配重离地间隙(mm) Counterweight ground clearance (mm) | 870 |
最小离地间隙(mm) Min. ground clearance (mm) | 430 |
尾部回转半径(mm) Turning radius of vehicle tail(mm) | 2155 |
履带接地长度(mm) Ground contact length of track(mm) | 3000 |
履带长度(mm) Track shoe length (mm) | 3735 |
轨距(mm) Track gauge(mm) | 2000 |
履带宽度(mm) Track shoe width (mm) 800 | 2500 |
履带板宽度(mm) Track shoe width(mm) | 500 |
转台宽度(mm) Rotary table width(mm) | 2490 |
最大挖掘高度(mm) Maximum excavating height(mm) | 8870 |
最大卸载高度(mm) Maximum unloading height(mm) | 6420 |
最大挖掘深度(mm) Maximum excavating depth(mm) | 5740 |
最大垂直壁挖掘深度(mm) Maximum vertical wall excavating depth(mm) | 5190 |
挖出2.5m水平面时的最大挖掘深度(mm) Maximum excavating depth (when on a water level of 2.5 meters long)(mm) | 5525 |
最大挖掘距离 Maximum excavating distance | 8605 |
在地平面的最大挖掘距离(mm) Maximum excavating distance at ground level(mm) | 8480 |
最小回转半径(mm) Minimum turning radius(mm) | 2495 |
最小回转半径时最大高度(mm) Maximum height at minimum turning radius(mm) | 6430 |
回转中心至后端部的距离(mm) Distance between the center of gyration and the rear end side(mm) | 2155 |
配重高度(mm) Counterweight height(mm) | 1935 |
接地长度(运输时)(mm) Ground contact length(during transportation)(mm) | 4410 |
斗杆长度(mm) Bucket rod length(m) | 2500 |
动臂长度(mm) Length of swing arm (m) | 4600 |
